| HS Code | 479078 |
| Productname | Polyisobutylene HRD-600 |
| Chemicalname | Polyisobutylene |
| Casnumber | 9003-27-4 |
| Appearance | Colorless to light-yellow viscous liquid |
| Densityat20c G Cm3 | 0.88-0.90 |
| Kinematicviscosityat100c Mm2 S | 30-45 |
| Flashpoint C | >150 |
| Pourpoint C | -20 |
| Color Apha | ≤50 |
| Moisture Percent | ≤0.05 |
| Ash Percent | ≤0.005 |
| Acidvalue Mgkoh G | ≤0.05 |
| Alphaolefincontent Percent | ≥75 |
| Iodinevalue Gi2 100g | 30-42 |
| Solubility | Soluble in aliphatic and aromatic hydrocarbons; insoluble in water |
As an accredited Polyisobutylene HRD-600 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Polyisobutylene HRD-600 is packaged in 200 kg steel drums with polyethylene liners, securely sealed and clearly labeled for industrial handling. |
| Container Loading (20′ FCL) | Polyisobutylene HRD-600 loaded in a 20-foot FCL container, securely packed and sealed for international transport. |
| Shipping | Shipping description: Polyisobutylene HRD-600 is a non-hazardous polymer and is generally not regulated for transport. Ship in original, sealed containers/packaging, protected from moisture, heat, and contamination. Store in a cool, dry, well-ventilated area; follow the SDS and applicable local regulations. |
| Storage | Store Polyisobutylene HRD-600 in a cool, dry, well-ventilated area away from direct sunlight, heat, ignition sources, and strong oxidizers. Keep containers tightly closed, properly labeled, and protected from moisture and contamination. Maintain stable temperatures and avoid excessive heat or freezing. Use secondary containment where appropriate, and follow local regulations and SDS recommendations for safe handling and storage. |
| Shelf Life | Polyisobutylene HRD-600 typically has a shelf life of about 24 months when kept in original, unopened containers under dry, cool conditions. |
Thermal maleation of HRD-600 as a high-reactive polyisobutylene intermediate in ashless dispersant production proceeds through a bulk ene reaction in glass-lined agitated reactors. The terminal vinylidene content governs maleic anhydride grafting conversion; production lines maintain the maleic anhydride to polyisobutylene molar feed ratio at 1.05:1 to 1.45:1 when the downstream amidation target is a succinimide dispersant with a total base number between 20 and 60 mg KOH/g. Reaction temperature is held at 195°C to 230°C under a nitrogen sweep of 0.1–0.3 MPa, with residence time of 4–10 h adjusted to residual maleic anhydride content. Failure modes on full-scale batches include gel formation when the polyamine addition stage is executed with a primary amine deficiency below 0.8 mol amine per mol PIBSA, and unreacted polyisobutylene carryover exceeding 5 wt% when wiped-film evaporator vacuum deteriorates above 2.0 kPa. Downstream, the succinimide is diluted in Group I or Group II base oil and supplied as a 40–60 wt% active dispersant concentrate. Finished passenger car motor oils and heavy-duty diesel engine oils receive the dispersant at 2.0–8.0 wt% depending on soot-handling requirements of API CJ-4 or SP category formulations. Conformance testing for the compounded lubricant includes ASTM D2896 for base number retention, ASTM D4739 for acid neutralization, and ASTM D892 for foaming tendency after aqueous contamination. Terminal product types include passenger car motor oil, heavy-duty diesel engine oil, marine trunk piston engine oil, and off-highway crankcase lubricants.
For port fuel injection deposit control applications, HRD-600 is converted through hydroformylation of the terminal double bond to a polyisobutylene alcohol intermediate, followed by reductive amination to the corresponding polyisobutylene amine. The amine is not used as a bulk fuel component; commercial gasoline is treated with 30–250 mg/kg active detergent in finished fuel, although the upper boundary is constrained by intake valve deposit test repeatability and by the solubility limit in ethanol-blended gasoline at low temperature. Continuous stirred-tank reactors with synthesis gas pressure at 10–20 MPa and rhodium or cobalt catalyst systems are used for the hydroformylation stage, with the aldehyde intermediate converted in a separate fixed-bed amination reactor. Finished detergent packages are blended with carrier fluid at 20–50 wt% active content before injection into gasoline terminals. Compliance of the finished fuel is evaluated under ASTM D6201 for port fuel injection intake valve deposits and CEC F-05-93 for the European test protocol; ASTM D5599 is used for oxygenate species verification when ethanol is present. Published dynamometer data for this specific molecular weight in gasoline direct injection engines is limited; most publicly available deposit studies address port fuel injection hardware. Terminal product types include aftermarket fuel additive packages, refinery gasoline deposit-control additives, and finished gasoline detergent systems for deposit-prone intake valve environments.
Insulating glass secondary sealant formulations incorporate HRD-600 as a non-volatile plasticizer and tackifier in polyisobutylene butyl sealant matrices at addition levels of 10–35 phr on butyl polymer. The lower boundary is set by viscosity reduction requirements in cold-applied formulations, while the upper boundary is set by slump resistance after application and by the tensile adhesion requirement of ASTM C920 for movement capability. Compounding is performed in sigma-blade kneaders with vacuum stages at 0.06–0.09 MPa to prevent air entrainment, followed by a continuous extruder with a screw L/D ratio of 20:1 to 30:1 for forming. Manufacturing lines that exceed 35 phr often report reduced lap shear adhesion and increased tack transfer to spacer frames, a failure mode observed on dual-seal insulating glass units subjected to EN 1279-2 gas leakage and moisture penetration testing. Terminal product types include dual-seal insulating glass units, structural glazing seals, and construction joint sealants. Regulatory conformance is documented under ISO 11600:2002 for sealant classification and REACH (EC) No 1907/2006 for polymer registration; for applications involving incidental food contact, FDA 21 CFR 177.2600 may apply to the cured sealant as a rubber article.
In hot melt adhesive upgrading, HRD-600 is introduced as a non-volatile plasticizer component when formulators replace naphthenic mineral oil at 5–25 wt% of total formulation. The addition is made downstream of the tackifier melt stage in a twin-screw extruder with L/D 40:1 and vacuum devolatilization at −0.09 MPa, where the polyisobutylene phase is injected at 120–160°C to avoid thermal degradation. Substitution above 25 wt% depresses cohesive strength and may cause blocking in finished pressure-sensitive labels stored at 40°C and 80% relative humidity, a failure documented by ASTM D3654 shear adhesion testing. Adhesive systems using HRD-600 exhibit lower volatility than mineral oil grades when compared by thermogravimetric mass loss at 150°C for 4 h, but the compatibility limit with styrenic block copolymers must be confirmed by melt rheology and optical clarity after 24 h at 130°C. Regulatory compliance for flexible packaging and label applications relies on FDA 21 CFR 175.105 for adhesive components and REACH (EC) No 1907/2006. Terminal product types include pressure-sensitive labels, packaging tapes, hygiene assembly adhesives, and removable industrial adhesion systems.
Cable filling compound production uses HRD-600 as a hydrophobic base fluid in water-blocking gels for copper twisted-pair telecom and optical fiber loose tubes at 25–60 wt% of the compound. The gel is produced in high-shear dispersion mixers under 2–5 kPa vacuum with fumed silica or mineral thixotropes added at 5–12 wt%; the polyisobutylene phase must be dehydrated to 200 ppm water or lower before dispersion to prevent hydrogen evolution in buried cable conditions. Formulations exceeding 60 wt% polyisobutylene show excessive cold flow in vertical cable runs at 60°C, while formulations below 25 wt% lose the low-temperature flexibility required by Telcordia GR-356 for filled core telephone cable. Conformance testing includes IEC 60794-1-22 for water penetration and ASTM D1500 for colour stability after heat ageing. Terminal product types include filled buried telephone cable compounds, optical fiber buffer tube gels, and mining cable water-blocking fillers. Published data for this specific configuration is limited, but field failures in copper cable—as documented in operating company maintenance reports—most often involve syneresis when the thixotrope loading is below 4 wt%.
During two-stroke engine oil blending operations, HRD-600 is incorporated at 5–20 wt% of the finished oil during the base oil preparation stage, before metering of solvent and ashless detergent packages. The polyisobutylene is blended with bright stock or Group I base oil at 60–80°C in turbine mixers, then cooled to 40°C for dilution with solvent to the viscosity target of 6.5–10.0 mm²/s at 100°C per ASTM D445. The blend is limited to the upper boundary of 20 wt% to prevent deposit formation in exhaust ports when metallic detergent levels are below 200 mg/kg calcium. Finished oils are tested under JASO FD, ISO EGD, and NMMA TC-W3 protocols, which include detergency, exhaust port blocking, and lubricity tests. Terminal product types include air-cooled two-stroke motorcycle oils, outboard engine oils, and low-smoke garden equipment lubricants. A production line failure observed in batch blending is phase separation of the polyisobutylene-rich phase if solvent is added below 40°C, requiring reheating and additional circulation.
Competitive Polyisobutylene HRD-600 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618005193850 or mail to sales8@alchemist-chem.com.
We will respond to you as soon as possible.
Tel: +8618005193850
Email: sales8@alchemist-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Polyisobutylene HRD-600 is a medium-molecular-weight polyisobutylene homopolymer supplied as a clear, viscous liquid. The suffix 600 denotes a nominal kinematic viscosity of 600 mm²/s at 100 °C when determined in accordance with ASTM D445. The polymer backbone is composed of isobutylene repeat units with a low concentration of terminal unsaturation, which distinguishes it from hydrogenated polyisobutylene or ethylene-propylene copolymers. Where lot-specific data are required, the manufacturer’s certificate of analysis takes precedence; values reported below are class-typical for medium-molecular-weight polyisobutylene and are not a substitute for release testing.
Typical physical property data for this molecular weight class include a number-average molecular weight of 1,200–1,800 g/mol by gel permeation chromatography using ISO 16014-1, a density of 0.890–0.910 g/cm³ at 15 °C by ISO 12185, and a flash point above 180 °C by Cleveland open-cup ASTM D92. Volatile content is typically below 0.2 wt% after 24 h at 105 °C per ISO 3251, and moisture content is controlled below 100 mg/kg by coulometric Karl Fischer titration ASTM D6304. The product is supplied in 180 kg steel drums or 900 kg intermediate bulk containers. Storage below 50 °C and exclusion of direct sunlight limit oxidative discoloration during inventory cycles.
| Property | Test method | Typical value or class range |
|---|---|---|
| Kinematic viscosity at 100 °C | ASTM D445 | 600 mm²/s nominal |
| Density at 15 °C | ISO 12185 | 0.890–0.910 g/cm³ |
| Number-average molecular weight | ISO 16014-1 | 1,200–1,800 g/mol |
| Flash point, Cleveland open-cup | ASTM D92 | > 180 °C |
| Volatile matter, 24 h at 105 °C | ISO 3251 | < 0.2 wt% |
| Water content | ASTM D6304 | < 100 mg/kg |
Grade selection in polyisobutylene systems is governed by molecular weight rather than density. HRD-600 occupies an intermediate position between low-viscosity plasticizers, nominally 100–300 mm²/s at 100 °C, and high-molecular-weight polyisobutylene elastomers with Mooney viscosity values from 50 MU to 80 MU as ML 1+8 at 125 °C in accordance with ASTM D1646. Its number-average molecular weight produces sufficient chain entanglement to contribute cohesive strength in hot-melt and sealant formulations while retaining pumpability at 120–160 °C. In contrast, low-molecular-weight grades act as plasticizers and viscosity reducers with minimal contribution to melt strength, whereas high-molecular-weight grades require rubber compounding equipment and extended mixing cycles.
| Parameter | Low-viscosity PIB | HRD-600 | High-molecular-weight PIB |
|---|---|---|---|
| Kinematic viscosity at 100 °C | 100–300 mm²/s (ASTM D445) | 600 mm²/s nominal (ASTM D445) | Not applicable; ML 1+8 50–80 MU at 125 °C (ASTM D1646) |
| Number-average molecular weight | 300–800 g/mol (ISO 16014-1) | 1,200–1,800 g/mol (ISO 16014-1) | 250,000–400,000 g/mol (ISO 16014-1) |
| Primary processing function | Plasticizer, viscosity reducer, carrier fluid | Tack modifier, cohesive strength builder, migration-resistant plasticizer | Elastomer base, impact modifier |
| Typical compounding equipment | Low-shear propeller or gear pump | Sigma-blade mixer, planetary mixer, or corotating twin-screw extruder | Internal mixer, two-roll mill, or ram extruder |
| Addition level in hot-melt adhesives | 5–15 wt% as plasticizer | 10–30 wt% as tackifier/cohesion modifier | Not used as plasticizer; requires masticating |
On a corotating twin-screw extruder with an L/D ratio of 40:1, HRD-600 requires a melt-temperature window between 120 °C and 190 °C. The lower boundary is set by viscosity: below 120 °C, the polymer does not adequately wet filler surfaces and screw torque rises sharply. The upper boundary is set by thermal stability. Thermogravimetric analysis under nitrogen at 10 °C/min typically shows 1 wt% mass loss near 250–280 °C for polyisobutylene of this molecular weight class, but oxidative conditions accelerate degradation. Nitrogen blanketing of the feed throat is therefore recommended when barrel temperatures exceed 170 °C. Published data for this specific configuration is limited, and the stated limits represent class-typical polyisobutylene behaviour rather than a lot-specific thermogram for HRD-600.
In high-shear compounding, segmented screws with kneading blocks at 60–90° staggering are used to disperse HRD-600 into styrenic block copolymer matrices. Reverse elements upstream of the die increase residence time but raise the risk of local overheating. The product should not be melt-blended with strong Lewis acids or residual Friedel-Crafts initiator fragments because these species catalyze backbone scission. Residual aluminum chloride above 50 mg/kg in a formulation can reduce viscosity stability. Free amine additives at concentrations above 0.1 wt% should be avoided during high-temperature melt processing because they can cause discoloration and interfere with tackifier resin compatibility. When HRD-600 is compounded into a styrenic block copolymer adhesive at 20 wt%, the addition lowers complex viscosity at 1 rad/s by approximately 40% relative to a formulation without plasticizer, measured by parallel-plate rheometry at 160 °C using ISO 6721-10.
In EPDM extrusion compounds, direct substitution of 10–20 phr of naphthenic oil with HRD-600 reduces surface migration after thermal aging at 100 °C for 168 h. The effect is evaluated by mass uptake on filter paper per ASTM D1203 or by visual bloom. Because polyisobutylene has a higher molecular weight and lower vapour pressure than naphthenic oil, it remains in the matrix rather than volatilizing during cure. The substitution is not universally benign. Tensile strength measured by ISO 37 may decrease by 5–15% if the total plasticizer level is not reduced, and compression set per ISO 815-1 may increase. Processing torque in a laboratory internal mixer with 70% fill factor increases by approximately 8–12% at a mix temperature of 60 °C compared with a naphthenic oil control. HRD-600 is not recommended for peroxide-cured systems where terminal unsaturation can consume radical species and alter crosslink density; sulfur-cured and phenolic-resin-cured systems are more tolerant.
High-voltage cable fill compounds use HRD-600 as a non-polar, low-moisture-transmitting fluid component. A typical formulation contains 45–60 wt% HRD-600, 20–35 wt% microcrystalline wax, and 5–10 wt% low-density polyethylene or fumed silica. The compounded gel is pumped into conductor interstices at 120–150 °C and cools to a semi-solid state. Volume resistivity of comparable polyisobutylene-based cable fills exceeds 1 × 10¹² Ω·m when conditioned at 23 °C and 50% relative humidity and tested in accordance with IEC 62631-3-1. Moisture vapour transmission rate through a 1 mm compression-moulded film is lower than that of mineral-oil-filled controls when measured by ASTM F1249 at 38 °C and 90% relative humidity. The principal processing bottleneck is air entrapment; vacuum deaeration at −0.08 MPa gauge for 30 min before cable filling reduces void formation.
Because HRD-600 lies within the molecular weight window preferred for polyisobutenyl succinic anhydride synthesis, it is used as a feedstock for lubricant dispersant production. The terminal double-bond architecture influences maleation yield. Conventional polyisobutylene grades typically require thermal ene reaction at 200–230 °C with a maleic anhydride molar ratio of 1.0:1.0 to 1.2:1.0, whereas high-reactivity grades react at lower temperature or with lower excess. HRD-600 should not be presumed to be a high-reactivity grade unless the certificate of analysis reports terminal vinylidene content above 70% by NMR or FTIR; published data for this specific configuration is limited. The resulting polyisobutenyl succinic anhydride is subsequently aminated with tetraethylenepentamine or triethylenetetramine to yield a dispersant with total base number controlled by amine stoichiometry. Dispersants derived from 1,000–2,000 g/mol polyisobutylene are standard in engine oil aftertreatment, and the 600 mm²/s viscosity of HRD-600 simplifies liquid handling compared with high-molecular-weight polyisobutylene feedstocks while retaining sufficient carbon chain length for soot and sludge suspension.