Products

Polyisobutylene HRD-450

    • Product Name: Polyisobutylene HRD-450
    • Factroy Site: Yuanbaoshan District, Chifeng City, Inner Mongolia, P.R. China
    • Price Inquiry: sales8@alchemist-chem.com
    • Manufacturer: Inner Mongolia Eppen Biotech Co., Ltd.
    • CONTACT NOW
    VTB
    Specifications
    HS Code 158013
    Product Polyisobutylene HRD-450
    Chemical Name Polyisobutylene
    Cas Number 9003-27-4
    Appearance Colorless to light yellow viscous liquid
    Number Average Molecular Weight ≈450 g/mol
    Density At 20 C ≈0.88–0.90 g/cm³
    Kinematic Viscosity At 100 C ≈30 cSt
    Flash Point >150 °C
    Pour Point < -30 °C
    Water Content ≤0.05%
    Volatile Matter ≤0.5%
    Ash Content ≤0.05%
    Color Apha ≤50
    Acid Value ≤0.05 mg KOH/g
    Terminal Vinylidene Content ≥70%
    Solubility Soluble in hydrocarbons; insoluble in water
    Thermal Stability Good

    As an accredited Polyisobutylene HRD-450 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Polyisobutylene HRD-450 is typically supplied in 180 kg net steel drums, palletized for shipment; bulk ISO tank delivery is also available.
    Container Loading (20′ FCL) Polyisobutylene HRD-450 is loaded into a 20′ FCL container in suitable packaging, securely stowed and sealed for ocean shipment.
    Shipping Polyisobutylene HRD-450 is shipped as a non-hazardous solid polymer in sealed bags, drums, or containers. Store and transport in a cool, dry, ventilated area away from direct sunlight, heat, moisture, and contamination. No special UN dangerous-goods classification is required; follow local regulations and the SDS.
    Storage Store Polyisobutylene HRD-450 in a cool, dry, well-ventilated area away from direct sunlight, heat, ignition sources, and strong oxidizing agents. Keep containers tightly closed, clearly labeled, and protected from moisture and contamination. Use appropriate containment to prevent spills. Maintain good housekeeping, do not store near food, feed, or incompatible materials, and follow the manufacturer’s safety data sheet and local regulations.
    Shelf Life Polyisobutylene HRD-450 typically has a 24-month shelf life when stored unopened in dry, cool, recommended conditions.
    Application of Polyisobutylene HRD-450

    Maleation of HRD-450 is conventionally conducted in a jacketed stainless-steel reactor equipped with a turbine mixer and external heating/cooling loops, using a nitrogen sparge to limit colour-body formation during the thermal ene addition of maleic anhydride. The 450 g/mol nominal molecular weight places the grade in the low-viscosity reactive polyisobutylene range, and the high terminal vinylidene content permits chlorine-free succinimide manufacturing rather than the conventional chlorinated-PIB route. The maleic anhydride:polyisobutylene mole ratio is held between 1.2:1 and 1.7:1, with peak reaction temperature limited to 200–225 °C; sustained excursions above 230 °C increase resinous by-products and raise the molecular weight of the PIBSA intermediate beyond the range preferred for later amine condensation. Typical hold time in batch reactors is 6–12 h, after which unreacted maleic anhydride is removed by vacuum stripping to below 1.0 wt%. The resulting PIBSA intermediate is condensed with heavy polyamines such as tetraethylenepentamine or polyethyleneamine bottoms at 140–160 °C, with water of reaction removed under sub-atmospheric pressure. In heavy-duty diesel engine oils the succinimide dispersant is used at 3–7 wt% active polymer, with final oil performance screened by ASTM D6593 Sequence VG sludge ratings and ASTM D7097 TEOST MHT deposit masses. Run-to-run variance data for this specific HRD-450 configuration are limited in published form; plant qualification typically includes pilot-scale maleation followed by oxidation and sludge screening against a reference dispersant.

    Gasoline deposit-control synthesis routes use HRD-450 as the hydrophobic backbone for succinimide-type fuel detergents, generally through partial amination of PIBSA with a short-chain polyamine such as dimethylaminopropylamine or diethylenetriamine. The resulting fuel detergent is blended into finished gasoline at 100–500 mg/kg, with typical commercial treat rates falling near 300 mg/kg active species. Port fuel injector and intake valve deposit performance is evaluated in engine dynamometer testing under ASTM D6201, and the detergent is normally combined with a high-boiling carrier fluid to limit valve-stem deposit formation. Direct-injection gasoline engines present a separate deposit mechanism on injector tips; published standardized designations for GDI injector fouling remain largely OEM-specific rather than ISO/ASTM harmonized, which limits universal numerical comparison. Above 500 mg/kg, additional detergent does not produce a linear benefit and may increase combustion chamber deposit formation if the carrier fluid balance is not adjusted. Finished package flash point is tested under ISO 2592; heated blending vessels must maintain inert-gas blanketing when the process temperature exceeds 10 °C below the measured flash point.

    Application stageTest designationControlled parameter
    PIBSA intermediateASTM D664Acid number
    Kinematic viscosity at 100 °CASTM D445 / ISO 3104mm²/s
    HDEO dispersancyASTM D6593Sequence VG sludge rating
    Piston deposit testingASTM D7097TEOST MHT deposits
    Rust preventionASTM D665Method A / B rust rating
    Diesel injector foulingCEC F-23-01Nozzle coking
    Gasoline intake valve depositASTM D6201IVD mass
    Crude oil dehydrationASTM D4007Basic sediment and water

    Does Rust-Inhibitor Performance Persist When PIBSA Is Esterified with Polyols in Neat Metalworking Oils?

    In neat oil-based drawing compounds, HRD-450-derived PIBSA is partially esterified with pentaerythritol or trimethylolpropane at 120–150 °C under nitrogen, using an acid catalyst that is later neutralized with potassium hydroxide. The esterification is stopped by acid number, typically monitored by ASTM D664, to retain free carboxyl groups for polar anchoring on steel and copper alloy surfaces. The corrosion-inhibited drawing oil is evaluated by ASTM D665 Method A and Method B; copper staining is assessed by ASTM D130 at 100 °C for 3 h. In severe forming operations the PIB-derived ester is added at 2–10 wt% of the neat oil, with the upper limit controlled by film thickness and subsequent degreasing costs. Over-esterification that drives the acid number below 5 mg KOH/g reduces the polar anchoring capacity and is a documented failure mode in multi-metal stamping baths. The intermediate is not recommended for water-miscible emulsions unless the free acid is neutralized with an alkanolamine; the resulting amine soap can hydrolyze in hard water with calcium carbonate equivalents above 400 mg/L, producing sludge and filter blinding.

    During crude oil dehydration trains, polyisobutenyl succinimide derivatives from HRD-450 are evaluated as demulsifier basestocks, usually after partial esterification with polyethylene glycol or after amination with monoethanolamine. In field bottle tests the intermediate is dosed at 20–100 mg/kg of wet crude, with water drop and interface quality measured after 30–60 min of settling at 60–80 °C. The test method for residual basic sediment and water is ASTM D4007, although field laboratories frequently use centrifuged water dropout as a faster surrogate. A processing constraint arises when unreacted maleic anhydride remains in the PIBSA; it oligomerizes at the water-oil interface and stabilizes a rag layer, increasing demulsifier dose and slop oil production. Vacuum stripping of PIBSA to <1.0 wt% free maleic anhydride is therefore standard before polyol grafting. Published data for this specific HRD-450 feedstock in heavy-crude demulsification are limited to supplier development sheets; pilot bottle-testing against each crude assay is required because interfacial film composition varies with asphaltene content and produced-water salinity.

    When HRD-450 Is Added to Butyl Rubber Edge-Seal Formulations

    The use of HRD-450 in insulating glass edge seals begins with low-shear incorporation into butyl rubber in an internal mixer with jacket temperature below 110 °C, where the reactive polyisobutylene functions as a non-volatile plasticizer and wetting agent rather than a crosslinking component. Addition levels of 5–20 phr lower compound Mooney viscosity ML(1+8) at 100 °C by 5–15 units per 10 phr increment, allowing higher filler loadings of precipitated calcium carbonate without loss of extrusion quality. Sealant classification is evaluated against ISO 11600 movement classes, and rheological flow properties are measured under ASTM C639. The practical limit is migration: above 20 phr, the low-molecular-weight fraction begins to migrate into the secondary sealant interface, reducing cohesive strength and increasing compression set after thermal cycling. For insulating glass units, edge-seal conformity is also checked under EN 1279-2 moisture and gas leakage exposure where applicable, but published data for HRD-450 specifically are limited to commercial supplier bulletins rather than peer-reviewed design curves.

    Diesel Injector Cleanliness Additive Basestock from HRD-450

    Diesel fuel detergent chemistry uses the same PIBSA backbone but substitutes heavier polyamine tails and sometimes formaldehyde-coupled Mannich amines to increase high-temperature deposit removal on injector nozzles. HRD-450-derived succinimide detergents are formulated into middle distillate fuel at 50–250 mg/kg, with nozzle deposit control assessed by CEC F-23-01 engine testing. The grade’s low molecular weight keeps the detergent soluble in low-temperature diesel vehicles, but it does not by itself prevent internal diesel injector deposits caused by sodium carboxylate or alkenyl succinic acid corrosion soaps. Those internal deposits require separate corrosion inhibitor and acid neutralizer components in the additive package. The operational boundary is the pour point of the finished detergent package, which is adjusted with solvent carriers; unheated storage below −10 °C may require viscosity control and recirculation to prevent additive stratification.

    Free Quote

    Competitive Polyisobutylene HRD-450 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618005193850 or mail to sales8@alchemist-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618005193850

    Email: sales8@alchemist-chem.com

    Inquiry

    Get Free Quote of Inner Mongolia Eppen Biotech Co., Ltd.

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Polyisobutylene HRD-450 is supplied as a high-molecular-weight isobutylene homopolymer in semi-solid bale or pellet form. The polymer is manufactured by cationic polymerization of isobutylene in a chlorinated diluent with a Friedel-Crafts catalyst, followed by neutralization, water washing, and vacuum devolatilization. Published data for this specific configuration is limited; therefore, the figures shown in Table 1 are class-typical values for high-molecular-weight polyisobutylene and shall be verified against the supplier certificate of analysis before production qualification.

    Table 1. Class-typical specification profile for Polyisobutylene HRD-450.

    ParameterTest methodTypical value or range
    Viscosity-average molecular weight (Mv)ISO 16014-2:2019 (GPC, polystyrene equivalent)400,000–450,000 g/mol
    Density at 23 °CISO 1183-1:20190.91–0.92 g/cm³
    Mooney viscosity ML 1+8 at 100 °CASTM D1646-19a50–70 MU
    Glass transition temperatureISO 11357-2:2020−70 to −65 °C
    Ash contentISO 3451-1:2019≤ 0.10 %
    Volatile matterASTM D5668-21≤ 0.30 %

    How Does HRD-450 Differ from Low- and Medium-Molecular-Weight Polyisobutylene?

    Low-molecular-weight PIB grades in the 10,000–50,000 g/mol range are viscous liquids at ambient temperature. HRD-450, by contrast, displays solid-state rubbery behaviour and a higher entanglement density that suppresses cold flow. The higher molecular weight reduces migration from compounded polyolefin films and lowers oxygen and moisture permeability in barrier sealant formulations. In hot-melt adhesives, low-molecular-weight PIB functions primarily as a plasticizer and wetting aid, whereas HRD-450 contributes cohesive strength and reduces adhesive transfer to release liners. The differences relevant to formulation selection are summarized in Table 2.

    Table 2. Comparative behaviour between conventional low-molecular-weight PIB and HRD-450-class material.
    Property or behaviourLow-MW PIB (10,000–50,000 g/mol)HRD-450 class (400,000–450,000 g/mol)
    Physical form at 25 °CViscous liquidSemi-solid bale or pellet
    Cold flow resistanceLowHigh
    Migration rate from polyolefin matrixHighLow
    Oxygen permeability coefficientModerateLow
    Zero-shear viscosityLowHigh
    Dispersion energy requirementLowHigh
    Primary function in hot-melt adhesivePlasticizer and wetting agentCohesive strength modifier

    In hot-melt adhesive compounding, HRD-450 is metered into a heated mixer after the base polymer has reached a homogeneous melt. Addition levels from 5 wt% to 20 wt% are common for pressure-sensitive hot-melt systems, depending on the base elastomer and tackifier resin. At the lower addition boundary, the grade increases peel energy without significantly raising viscosity; at the upper boundary, cohesive strength improves but open time is shortened. Mixing is normally completed in a jacketed sigma-blade kneader or a planetary mixer at 110–140 °C until the material passes a clear melt dispersion test under transmitted light. Pilot-scale rheological evaluation is required for each adhesive formulation because published data for this specific configuration is limited.

    High-Shear Compounding Demands a Melt-Temperature Window of ≤ ±5 °C

    High-shear compounding of HRD-450 requires a controlled melt-temperature window because the polymer backbone is susceptible to mechanical and thermal chain scission. On a co-rotating twin-screw extruder with an L/D ratio of 40:1, the feed zone is held at 90–110 °C, and the melt temperature is not permitted to exceed 160 °C at screw speeds above 300 min⁻¹. The processing window narrows to ≤ ±5 °C at specific shear rates above 400 s⁻¹ in narrow clearance kneading blocks. Residence-time distribution broadens when low-viscosity process oil is added before the polymer is fully melted, causing high-molecular-weight fractions to accumulate in the kneading zone. Production-scale observations report that die pressure fluctuations increase when barrel temperatures in zones 4–6 exceed 150 °C. These conditions necessitate closed-loop thermal control and torque monitoring on the main drive. Published data for this specific configuration is limited, but the observed sensitivity is consistent with chain scission kinetics of high-molecular-weight PIB.

    Rheological characterization of HRD-450-class material at 130 °C yields a zero-shear viscosity in the range 10⁵–10⁶ Pa·s under oscillation. The storage modulus exceeds the loss modulus at frequencies below 0.1 rad/s, confirming solid-like behaviour in the melt state. Capillary rheometry at 100 s⁻¹ shows a power-law index of 0.2–0.4, which indicates pronounced shear thinning. These values explain the high torque observed on internal mixers and the need for oil addition before the polymer reaches the kneading zone.

    Thermal-Oxidative Stability and Additive Interactions in HRD-450 Compounding

    Thermal-oxidative stability of HRD-450 is governed by two processes: β-scission of the isobutylene backbone and free-radical initiation at unsaturated chain ends. Industrial compounding observations indicate that temperatures above 180 °C cause measurable molecular weight reduction within 10–15 min in open mixing equipment, although the exact rate depends on oxygen concentration and shear history. Addition of hindered phenolic antioxidants at 500–1000 ppm is standard. HRD-450 is incompatible with amine-based additives that promote premature crosslinking or color development; bromobutyl and chlorobutyl systems require separate stabilizer packages. Moisture exposure at relative humidity above 60 % requires pre-drying because condensed water can cause hydrolytic catalyst residues to form local acidic sites.

    Sealant tape and construction-membrane applications use HRD-450 at 10–30 wt% to reduce cold flow and increase tensile set resistance. Lap shear strength development is strongly dependent on filler wetting and requires a filler loading of 20–50 phr calcium carbonate or carbon black. Mixing in a sigma-blade kneader with a fill factor of 0.75–0.85 is typical. The addition of HRD-450 raises compound Mooney viscosity by 15–30 MU at 100 °C, so downstream calendering speeds are reduced unless process oil is added. Water-vapour transmission rate through a 2 mm cured sheet is typically below 0.5 g/m²·day at 23 °C and 85 % RH when the polymer is compounded with high-density filler.

    In butyl rubber compounds, HRD-450 acts as a non-vulcanizing plasticizer and improves tack without increasing sulfur demand. It does not participate in zinc oxide-based vulcanization because it lacks sufficient unsaturation. Replacement of 10 phr of butyl rubber with HRD-450 lowers compound Mooney viscosity and improves low-temperature flexibility but reduces green strength. Vulcanization kinetics determined by moving-die rheometer at 160 °C show a delay in t90 of 1–2 min per 10 phr replacement.

    The molecular architecture of HRD-450 is predominantly linear with a measurable terminal vinylidene fraction. The vinylidene end-group content influences chemical derivatization in succinimide production; high-vinylidene grades react faster with maleic anhydride than low-vinylidene grades. In HRD-450-class materials, terminal vinylidene content is typically 70–90 % of total unsaturation. Gel content measured after 24 h dissolution in cyclohexane at 25 °C is below 0.5 %.

    Incoming inspection of HRD-450 should include residual moisture, molecular weight distribution, and stabilizer content. The molecular weight distribution determined by GPC has a polydispersity index typically between 2.0 and 3.5; broader distributions reduce melt elasticity and may indicate thermal degradation or reactor upsets. The supplier certificate of analysis also reports total ash and volatile matter. For high-speed automated feeding, pellet geometry should be controlled to a bulk density of 400–550 kg/m³ to avoid bridging in hoppers.

    Dispersant and lubricant-additive manufacturing uses HRD-450 as a polymer backbone for succinimide and Mannich adduct synthesis. The polymer is dissolved in a paraffinic process oil or a chlorinated solvent, then reacted with maleic anhydride under nitrogen at 150–190 °C for 6–12 h. The resulting polyisobutenyl succinic anhydride content is monitored by acid number titration according to ASTM D664, with amination reactions controlled to a nitrogen content of 0.5–1.5 % by mass. In fuel-additive packages, HRD-450-derived compounds reduce intake-valve deposits in port-fuel-injection engines through dispersant action. The high molecular weight increases dispersancy relative to lower-MW PIB but reduces low-temperature solubility in paraffinic base oils; dilute blending at 50–80 °C is used to avoid gel formation during storage.

    When HRD-450 Is Evaluated for Food-Contact and Medical-Grade Compliance

    Compliance with food-contact regulations requires verification of extractables, residual solvent, and catalyst residues. The base polymer can be formulated to meet FDA 21 CFR 177.1520 for olefin polymers when the finished article is tested for total extractives. For medical uses, cytotoxicity and hemocompatibility are assessed under ISO 10993-5:2009 and ISO 10993-4:2017. The product must be free from mineral oil contamination if used in adhesive layers for transdermal patches. REACH compliance is maintained through registration of the monomer and polymer under the applicable tonnage band; RoHS compliance is not directly applicable to the polymer itself, but lead, cadmium, mercury, and hexavalent chromium concentrations must be below 1000 ppm for electrical and electronic applications. Residual solvent content is typically controlled to < 100 ppm by gas chromatography.

    Under industrial storage conditions, Polyisobutylene HRD-450 should be kept in unopened packaging at or below 30 °C, protected from UV and direct sunlight. The material is incompatible with strong oxidizers, free-radical initiators, and certain amine-based accelerators; contact with copper or manganese ions can accelerate oxidative degradation. High-shear processing in internal mixers should be limited to batch times below 45 min at melt temperatures above 150 °C. The grade is not suitable for applications requiring continuous service above 120 °C without additional antioxidant stabilization.