| HS Code | 548702 |
| Productname | Diisobutylene |
| Chemicalname | Mixture of 2,4,4-trimethyl-1-pentene and 2,4,4-trimethyl-2-pentene |
| Casnumber | 25167-70-8 |
| Molecularformula | C8H16 |
| Molecularweight | 112.21 g/mol |
| Appearance | Colorless liquid |
| Odor | Gasoline-like |
| Boilingpoint | 101-105 °C |
| Density | 0.72 g/cm3 at 20 °C |
| Flashpoint | 8 °C closed cup |
| Solubilityinwater | Insoluble |
| Solubilityinorganicsolvents | Soluble in hydrocarbons, alcohols, and ethers |
| Vaporpressure | Approximately 5 kPa at 20 °C |
| Flammability | Flammable liquid |
| Unnumber | UN 2050 |
| Hazardclass | 3 |
As an accredited Diisobutylene factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Diisobutylene is packaged in UN-certified 200 L steel drums, with smaller 20 L HDPE containers available, labeled flammable liquid. |
| Container Loading (20′ FCL) | Load Diisobutylene into a clean, dry 20′ FCL container; secure labelled drums, ensure ventilation, and eliminate ignition sources. |
| Shipping | Diisobutylene is shipped as a Class 3 flammable liquid under UN 2050, proper shipping name “Diisobutylene, isomeric compounds,” Packing Group II. Use UN-approved packaging, flammable-liquid labels/placards, and keep containers closed, grounded, and away from heat, sparks, and ignition sources; comply with DOT/IMDG/IATA rules. |
| Storage | Store diisobutylene, a flammable liquid, in a cool, dry, well-ventilated area away from heat, sparks, open flames, and strong oxidizers. Keep containers tightly closed and labeled; use grounded, explosion-proof equipment and bonding during transfer. Store only in approved containers. Protect from sunlight and moisture, avoid incompatible materials, provide spill containment, and follow local regulations and the SDS. |
| Shelf Life | Stable under recommended storage conditions; typical shelf life is 24 months when kept cool, dry, tightly sealed, and away from ignition sources. |
Commercial diisobutylene is a two-isomer stream of 2,4,4-trimethyl-1-pentene and 2,4,4-trimethyl-2-pentene, with the alpha-isomer commonly present at 70–80 wt% and the beta-isomer at 20–30 wt% depending on upstream dimerization catalyst selectivity and distillation cut. In oxo synthesis, the olefin is contacted with synthesis gas over a ligand-modified rhodium catalyst at 80–120°C and 20–50 bar, producing 3,5,5-trimethylhexanal as the principal aldehyde; the quaternary carbon in the substrate suppresses linear aldehyde formation because rhodium-alkyl intermediate propagation is sterically constrained at the disubstituted carbon centre. The crude aldehyde is then hydrogenated in a fixed-bed nickel catalyst at 110–150°C and 25–60 bar, followed by vacuum distillation to an isononanol purity of 99.0–99.7 wt%. The industry compliance path is dictated by downstream plasticizer use: DINP produced from isononanol must be evaluated under REACH Annex XVII entries 51/52 for phthalates in toys and childcare articles where concentration exceeds 0.1 wt%, and food-contact applications require specific migration screening under Commission Regulation (EU) 10/2011 as amended. In flexible PVC formulation, the DIB-derived DINP is incorporated at 20–120 phr depending on target Shore hardness, with 38–54 phr common in 70 Shore A cable-sheathing compounds. The downstream production sequence continues through esterification of isononanol with phthalic anhydride over a tetraalkyl titanate catalyst at 220–250°C, with continuous removal of reaction water until acid value falls below 0.1 mg KOH g⁻¹. Terminal product types include plasticised PVC wire insulation, automotive interior skins, roofing membrane top layers, and flooring wear layers.
In the acid-catalysed alkylation of phenol with diisobutylene, the phenol-to-olefin molar feed ratio is maintained at 2.0–4.0:1 to favour monoalkylation at the para position; lower ratios increase dialkylated by-products that reduce downstream ethoxylate colour stability and raise formulation viscosity. The reaction is carried out over a fixed-bed cation-exchange resin or acid-activated clay at 80–120°C, with the crude alkylate then vacuum-fractionated to obtain 4-(1,1,3,3-tetramethylbutyl)phenol at purities above 99.0 wt% and a para-to-ortho ratio typically exceeding 95:5. Under EU CLP Regulation 1272/2008, the concentrated substance carries environmental hazard classification, and the parent 4-tert-octylphenol is subject to REACH Candidate List screening under Article 57(f); suppliers of preparations containing the substance above 0.1 wt% must verify current communication and notification duties. For downstream novolak synthesis, the alkylphenol is combined with formaldehyde at an alkylphenol-to-formaldehyde molar ratio of 1:0.75–0.82, yielding a ring-and-ball softening point of 95–110°C by ASTM E28. Terminal product types include alkylphenol-formaldehyde tackifier resins, ethoxylate surfactant intermediates, and alkylated diphenylamine antioxidant feedstocks. The process route is substantially different from linear olefin alkylation because the branched C8 group creates a tertiary-butyl-type steric shield that stabilises the alkylated phenol against oxidative discolouration in later condensation chemistry.
A novolak tackifier derived from 4-(1,1,3,3-tetramethylbutyl)phenol enters a radial tyre carcass compound at 2–10 phr, with a typical loading of 4–6 phr when the formulation also contains hexamethoxymethylmelamine at 0.5–1.5 phr or hexamethylenetetramine at 0.8–1.2 phr as methylene donor. The resin is polymerised in a batch reactor at 90–105°C under acid catalysis, and its molecular weight is controlled by the alkylphenol-to-formaldehyde molar ratio so that the novolak number-average molecular weight remains approximately 900–1,200 g mol⁻¹. In the rubber mixing line, the tackifier is introduced after carbon black dispersion but before curatives in an internal mixer with a fill factor of 0.65–0.75; the dump temperature is held below 115°C to prevent premature reaction with the methylene donor and subsequent scorch. Failure to control the resin-to-donor ratio produces either insufficient ambient building tack or excessive crosslink density modification, the latter causing a measurable loss in elongation at break. Compliance for tyre components requires PAH limits under REACH Annex XVII entry 50, and unvulcanised compound processing behaviour is evaluated by Mooney viscosity according to ISO 289-1; resin batches are additionally screened for free phenol residual below 0.5 wt% by gas chromatography. Terminal product types include passenger radial tyre carcass and belt skim compounds, conveyor belt tie gum, hydraulic hose adhesion layers, and calendered rubber sheet for retreading envelopes.
Ethylene oxide insertion into 4-(1,1,3,3-tetramethylbutyl)phenol proceeds at 140–180°C and 3–5 bar over potassium hydroxide at 0.02–0.1 wt% of the reactor charge, producing an ethoxylate with a Poisson distribution of oxyethylene adducts. The average chain length is commonly 8–10 mol of ethylene oxide for emulsion-polymerisation emulsifiers and 4–6 mol for metalworking-fluid emulsifier packages. Compliance is governed by Regulation (EC) No 648/2004 on detergents, requiring final formulator confirmation of ultimate biodegradability under OECD 301B or 301F test series; because branched octylphenol ethoxylates show limited ready biodegradability, the application scope is concentrated in closed-loop or industrial systems rather than consumer detergents. The ethoxylate is dosed at 0.5–3.0 wt% based on total monomer mass in acrylic and styrene-acrylic latex production, and at 5–10 wt% in soluble-oil metalworking-fluid concentrates where low foaming and electrolyte tolerance are required. Downstream processing includes neutralisation with acetic acid, filtration, and dilution to a solids content of 70–80 wt% for storage stability. The parent alkylphenol content is controlled below 0.1 wt% because residual 4-tert-octylphenol triggers REACH Candidate List obligations under the SVHC communication regime. Terminal product types include pressure-sensitive adhesive lattices, architectural binder emulsions, industrial acid cleaner concentrates, and semi-synthetic metalworking fluids.
The alkylation of diphenylamine with diisobutylene over acid-treated clay or aluminium chloride at 120–160°C produces a mixture of mono- and bis-alkylated diphenylamine with branched octyl substituents; the branched topology improves solubility in Group I, Group II, and polyalphaolefin basestocks compared with linear C8 alkylates and reduces volatility during long-duration oxidative ageing. In formulated turbine oils, the DIB-derived alkylated diphenylamine is added at 0.2–0.8 wt% of finished product mass, while heavy-duty diesel engine oils may use 0.5–1.5 wt% in combination with aminic or phenolic synergists. Oxidative performance is evaluated through ASTM D6186 for oxidation induction time and ASTM D943 for inhibited mineral-oil oxidation lifetime; treat-rate response is strongly influenced by pre-existing peroxide content and dissolved catalytic metal concentration. The production process includes vacuum distillation to reduce unreacted diphenylamine below 0.5 wt%, filtration, and controlled blending into base oil at 60–70°C with continuous recirculation to avoid localised over-concentration. Compliance standards include DIN 51524-2 for HLP hydraulic fluids and ISO 6743-5 for turbine oils, with EU CLP 1272/2008 classification applied to the neat antioxidant. The material is not recommended as the sole oxidation-control chemistry in polyol ester refrigerant lubricants where polar basestocks reduce antioxidant solubility and where high-temperature compressor discharge deposits may become limiting at treat rates above 1.5 wt%. Terminal product types include R&O turbine oils, HLP hydraulic fluids, industrial gear oils, and top-treat packages for heavy-duty engine oils.
Koch carbonylation of diisobutylene to branched C9 carboxylic acid proceeds through a tertiary carbocation intermediate under strong acid conditions; the olefin is contacted with carbon monoxide and water in the presence of sulfuric acid or a supported BF3/phosphoric acid catalyst at 20–80°C and 50–200 bar, yielding a mixture of branched C9 carboxylic acids with high quaternary carbon content. The resultant acid stream is esterified with pentaerythritol or trimethylolpropane over a tin or titanium catalyst at 220–240°C with vacuum stripping to remove water and unreacted acid, producing a neopolyol ester base fluid with kinematic viscosity targeted to the compressor or turbine specification. In refrigeration lubricant compounding, the ester base fluid constitutes 95–98 wt% of the finished oil, while the DIB-derived C9 acid may represent 50–100 wt% of the acid feed to the esterification train depending on the desired viscosity grade and miscibility with R-134a or R-32. Compliance for the finished polyol ester is referenced against ISO 6743-3 for compressor oil classification, and antiwear response is screened by ASTM D665 for rust and copper corrosion behaviour; thermal stability in sealed-tube testing with copper and steel coupons is applied because ester decomposition at hot-spot temperatures can release carboxylic acid and raise total acid number. The branched acid structure is critical for hydrolytic stability, where linear C9 acids give measurably higher water sensitivity in the presence of hydrofluorocarbon refrigerants. Terminal product types include polyol ester refrigeration oils, aviation turbine engine lubricants, and high-temperature chain oils where low deposit formation and high solvency of additives are required.
Competitive Diisobutylene prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618005193850 or mail to sales8@alchemist-chem.com.
We will respond to you as soon as possible.
Tel: +8618005193850
Email: sales8@alchemist-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Diisobutylene (DIB, CAS 25167-70-8) is a branched C8 olefin mixture composed predominantly of 2,4,4-trimethyl-1-pentene (CAS 107-39-1) and 2,4,4-trimethyl-2-pentene (CAS 107-40-4). The commercial product is manufactured by acid-catalysed dimerisation of isobutene over macroporous sulfonic acid ion-exchange resin or solid phosphoric acid. Because the dimerisation is exothermic, industrial units use external cooling loops to keep the catalyst bed temperature between 50°C and 80°C; higher temperatures increase beta isomer and triisobutylene formation. Typical commercial DIB contains 70–80 wt% alpha isomer and 20–30 wt% beta isomer, with a molecular weight of 112.21 g/mol.
Commercial DIB is supplied as DIB-98, DIB-99, and stabilised DIB-99.5 grades. DIB-98 is commonly stabilised with 10–30 mg/kg 4-tert-butylcatechol, while DIB-99 is supplied with lower sulfur and water thresholds and a narrow distillation cut. The stabiliser package influences downstream catalyst deactivation and colour formation; therefore, the specification should be matched to the intended reaction sequence. Table 1 summarises release limits for a general-purpose DIB-98 grade.
| Parameter | Typical range or limit | Test method |
|---|---|---|
| Total DIB purity | ≥98.0 wt% | ASTM D5134 |
| Alpha-isomer content | 70–80 wt% | ASTM D5134 |
| Beta-isomer content | 20–30 wt% | ASTM D5134 |
| Water | ≤50 mg/kg | ASTM E1064 |
| Total sulfur | ≤5 mg/kg | ASTM D5453 |
| Colour, Pt-Co | ≤10 | ASTM D1209 |
| Density at 20°C | 0.715–0.720 g/mL | ASTM D4052 |
| Distillation range | 101–106°C | ASTM D1078 |
Closed-cup flash point for DIB is approximately -7°C by ASTM D56, and the product is classified as a highly flammable liquid. Lower explosive limit in air is approximately 0.8 vol%, and upper explosive limit is approximately 5.6 vol%. The vapour is heavier than air and may form explosive mixtures; storage and handling areas require floor-level ventilation and electrical classification appropriate for Zone 1 or Class I Division 1 equivalents.
In para-tert-octylphenol production, DIB reacts with phenol over macroporous sulfonic acid ion-exchange resins in fixed-bed reactors at 90–110°C. The phenol-to-DIB molar ratio is maintained between 3:1 and 5:1 to suppress dialkylate below 2 wt%. Feed water above 100 mg/kg hydrates the sulfonic acid sites and reduces cycle length; therefore, the DIB feed is dried to ≤50 mg/kg water by ASTM E1064 before entering the alkylation train. Iron above 1 mg/kg accelerates stabiliser consumption and acid-resin fouling, so piping and storage vessels are specified in 316L stainless steel or lined carbon steel. The beta isomer is less reactive under these conditions; DIB-98 with alpha content below 70 wt% produces measurable increases in ortho-alkylated by-products and dialkylate at the same conversion. Published data for isomer-specific deactivation rates in DIB phenol alkylation is limited; the operating thresholds cited are derived from industrial resin alkylation practice for branched C8 olefins.
The fixed-bed alkylation reactor may be operated in adiabatic or recycle mode. The adiabatic temperature rise is controlled by recycling a portion of the reactor effluent, while typical operating pressure is maintained at 0.3–0.8 MPa to avoid vapour locking. At a liquid hourly space velocity of 0.5–1.5 h⁻¹, dialkylate formation is suppressed by excess phenol, although the economics are limited by downstream phenol recovery energy. Product quality is monitored by gas chromatography for para-tert-octylphenol content and by ASTM D1209 for colour stability after reaction.
Diisobutylene also enters radical copolymerisation with maleic anhydride at 80–120°C in high-boiling aliphatic or aromatic solvents. The reaction is conducted at solids contents of 40–60 wt% using peroxide initiators. The alpha isomer is consumed preferentially; unreacted beta isomer is removed by reduced-pressure stripping and may be recycled. Copolymer molecular weight is controlled between 1,000 g/mol and 20,000 g/mol by initiator concentration and solvent chain-transfer agent. Residual beta isomer above 5 wt% in the feed lowers yield per pass and broadens the molecular weight distribution, which is measured by ASTM D5296 or equivalent gel permeation chromatography.
Diisobutylene is further used as an alkylating agent for diphenylamine to produce liquid or low-melting alkylated diphenylamine antioxidants. In this application, the branched C8 substituent imparts lower volatility and improved solubility in polyalphaolefin base stocks compared with butyl or nonyl substituents. Reaction is carried out at 120–140°C with acid clay or Friedel-Crafts catalysts; the mono- to di-alkylation ratio is controlled by DIB stoichiometry and residence time. Residual amine content is measured by ASTM D2896 or equivalent total base number method.
Selective hydrogenation of DIB to 2,2,4-trimethylpentane is carried out in trickle-bed reactors using supported nickel or palladium-on-alumina catalysts. The operating window is generally 120–160°C at 2–4 MPa hydrogen partial pressure, with liquid hourly space velocity of 0.5–1.5 h⁻¹. The alpha isomer hydrogenates more readily than the beta isomer; catalyst bed peak temperature rise is kept below 25°C to minimise skeletal isomerisation and cracking. Total sulfur in the DIB feed above 5 mg/kg by ASTM D5453 shortens catalyst cycle length through metal sulfide formation. Carbon monoxide in the recycle hydrogen above 10 ppmv deactivates palladium sites; therefore, purge-gas control is required. A recycle ratio of 4:1 to 6:1 limits adiabatic temperature rise and improves catalyst wetting. Stabiliser compounds such as 4-tert-butylcatechol should be removed or accounted for because they increase pressure drop and can deactivate nickel. Published data for DIB-specific deactivation rates in trickle-bed units is limited; the values quoted reflect general C8 olefin saturation practice.
In trickle-bed operation, catalyst bed grading with inert ceramic spheres is used to distribute liquid and reduce channelling. Superficial liquid mass velocity is kept above 2 kg/m²s to ensure adequate wetting. Inlet distributor fouling from stabiliser residues is controlled by filtration to 10 µm absolute. Hydrogen-to-hydrocarbon molar ratio is maintained above 3:1 to limit coking. The saturated product is distilled to meet a 2,2,4-trimethylpentane purity of ≥99 wt% and a sulfur content below 5 mg/kg.
Direct blending of DIB into gasoline is constrained by vapour pressure and deposit-forming tendency. The preferred fuel pathway is hydrogenation to 2,2,4-trimethylpentane, which has research octane number 100 and motor octane number 100. For storage, DIB is held in 316L stainless steel or lined carbon steel tanks fitted with nitrogen blanketing at 0.5–1.0 kPa gauge. Unstabilised material exposed to air at 25°C develops peroxide active oxygen above 10 mg/kg within weeks at liquid-air interfaces. Stabilised DIB containing 10–50 mg/kg TBC or BHT is normally specified to remain below 5 mg/kg peroxide active oxygen for 12 months. DIB should not be stored in contact with copper or iron because soluble metal ions accelerate radical initiation.
Selection of DIB in place of isobutene is often driven by physical state and storage intensity. Isobutene is a gas at ambient temperature and requires pressurised or refrigerated storage; DIB is a liquid with vapour pressure below 6 kPa at 20°C. In acid alkylation, DIB is less reactive than isobutene because the double bond in the trisubstituted olefin is sterically hindered. In metallocene-catalysed copolymerisation, 1-octene is a linear comonomer with high insertion rates; DIB alpha isomer can insert, but the beta isomer is largely inert and may reduce catalyst productivity by reversible coordination. DIB introduces quaternary carbon and gem-dimethyl side groups that raise segmental stiffness and reduce crystallinity relative to 1-octene. In radical polymerisation with maleic anhydride, DIB yields a more branched, less polar copolymer than 1-octene and is more resistant to hydrolytic degradation.
| Property or behaviour | Diisobutylene | Isobutene | 1-Octene |
|---|---|---|---|
| CAS number | 25167-70-8 | 115-11-7 | 111-66-0 |
| Physical state at 20°C | Liquid | Gas | Liquid |
| Normal boiling point | 101–106°C | -6.9°C | 121°C |
| Closed-cup flash point | -7°C | -80°C | 21°C |
| Reactivity in acid alkylation | Moderate, sterically hindered | High | Low |
| Metallocene copolymerisation | Alpha isomer moderate; beta isomer low | High | High |
| Main downstream derivative | 2,2,4-trimethylpentane, alkylphenols, maleic anhydride copolymers | Polyisobutene, methyl tert-butyl ether | Polyalphaolefins, linear copolymers |
Batch-to-batch isomer ratio variation in DIB is a critical quality parameter for downstream operations. For phenol alkylation, DIB-98 with alpha content below 70 wt% is typically not recommended without additional catalyst reserve or lower space velocity. For hydrogenation, beta-rich material requires higher hydrogen partial pressure or longer residence time to reach 99 wt% saturation. DIB should be kept away from strong oxidisers, and acid-catalysed operations should be rate-controlled because the dimerisation equilibrium can regenerate isobutene under severe acid conditions. These constraints define the operating boundary between DIB and alternative C8 olefin feedstocks.